SA Grouts for Tile and Stone
| Unit Price: | Get Latest Price |
|---|---|
| Delivery Time: | 5 Days |
- Product Catalog
- Company List
Product Description
- Model No.: SA811
- Packaging: NET 25 paper bags, also available on request
- Brand Name: Shunan
- Place of Origin: Shanghai, China (Mainland)
Specifications 1)for most grouting applications,exterior&interior use
2)Water-resistant
3)For joint widths of 1/16" (1.5mm) up to 3/8"(9 mm
SA811 Sanded Grout for Tile and Stone Wider joints required sanded grout. This type of ground is comprised of the same things as unsanded grout, with the addition of sand, and is applied the same way. Typically, sanded grout is used in applications with large ceramic tile floors.
Tiling grout is used to fill the spaces between tiles or mosaics, and is often used to secure tile to its base.Grout is joint filler between the tiles that have been laid. It helps keep the tiles from excessive movement and stops water from getting behind the tiles. Sanded Grout is formulated from a blend of high strength portland cement, graded aggregates, polymers and color-fast pigments and provides a grout joint that is dense, hard and durable. Grout is a construction material used to embed rebars in masonry walls, connect sections of pre-cast concrete, fill voids, and seal joints (like those between tiles). Ceramic tile is commonly used for flooring, showers and countertops. Tiles are installed with mortar, which is basically a type of cement spread on the back of the tile or on the surface you are tiling. After all the tiles are set into the mortar and leveled out, the mortar must harden for at least 24 hours. At this point. grout is applied to fill in all the gaps between the tiles.
1. Grey grout for tile joints from 1.5mm to 9mm wide on wall and floor 2. Suitable for grouting ceramic tiles, marble, stones etc 3. Consumption: 0.1-0.2 kg/m2 4. Water addition: 0.23 liter/kg powder 5. Substrate preparation ·Ensure 24 hours of time interval after tiling ·Before grouting, make sure that the tiles joints are clean without water 
6. Physical Properties
2)Water-resistant
3)For joint widths of 1/16" (1.5mm) up to 3/8"(9 mm
SA811 Sanded Grout for Tile and Stone Wider joints required sanded grout. This type of ground is comprised of the same things as unsanded grout, with the addition of sand, and is applied the same way. Typically, sanded grout is used in applications with large ceramic tile floors.
Tiling grout is used to fill the spaces between tiles or mosaics, and is often used to secure tile to its base.Grout is joint filler between the tiles that have been laid. It helps keep the tiles from excessive movement and stops water from getting behind the tiles. Sanded Grout is formulated from a blend of high strength portland cement, graded aggregates, polymers and color-fast pigments and provides a grout joint that is dense, hard and durable. Grout is a construction material used to embed rebars in masonry walls, connect sections of pre-cast concrete, fill voids, and seal joints (like those between tiles). Ceramic tile is commonly used for flooring, showers and countertops. Tiles are installed with mortar, which is basically a type of cement spread on the back of the tile or on the surface you are tiling. After all the tiles are set into the mortar and leveled out, the mortar must harden for at least 24 hours. At this point. grout is applied to fill in all the gaps between the tiles.
1. Grey grout for tile joints from 1.5mm to 9mm wide on wall and floor 2. Suitable for grouting ceramic tiles, marble, stones etc 3. Consumption: 0.1-0.2 kg/m2 4. Water addition: 0.23 liter/kg powder 5. Substrate preparation ·Ensure 24 hours of time interval after tiling ·Before grouting, make sure that the tiles joints are clean without water 6. Physical Properties Items | Data | |
Abrasion resistance mm3 | < 2000 | |
Shrinkage value mm/m | < 3.0 | |
| Bending strength ( N/mm2 ) | standard experimental condition | >2.50 |
ater freezing and thawing cycles | > 2.50 | |
| Compressive strength ( N/mm2 ) | standard experimental condition | > 15.0 |
after freezing and thawing cycles | > 15.0 | |
Water absorption(g) | 30min | < 5.0 |
240min | < 10.0 | |
Related Keywords
Shanghai Shunan Building Material CO.,LTD is a construction company and building materials manufacturer.
The EIFS products produced in Shunan are:
1) Dry-mix mortar
- Brick-laying mortar
- Tile adhesives and joints grouts
- Wall renders and plasters ( interior and exterior)
- Floor screeds, self-levelling underlayments and skim coats
- External Insulation and Finishing Systems (EIFS) products
- Powder paints
- Patching and repair mortars
2) Thermal Insulation Panels And Fireproof Board
- Polyurethane/polyisocyanate composite board, pre-insulated air duct panel alu foil covered, freezer panel
- Polyestyrene foam insulation sheets(Extruded Polystyrene Insulation and Expanded Polystyrene Insulation), EPS/XPS sandwich panels, thermo-acoustic insulation layer from extruded polystyrene
- Rockwool insulation board
- Cellular glass boards
3) Accessories and supplementary of EIFS
- Fiberglass mesh & fiber glass mesh self - adhesive
- EIFS plastic dowels
- Corner bead
4)Concrete Admixtures
- Concrete/mortar accelerator
- SNF
- Expansion agent (sy-a,sy-k,sy-g)
- High performance water reducing agent
5)Base coat( bottom coating)/Top Coating
- Heavy Textured Acrylic Primer
- Heavy Textured Acrylic Finish Coat
6)Waterproofing materials
- Polyurethane waterproofing coating
- Waterproof Membrane
The product of the company has the following characteristics
1) Environmentally friendly and healthy, we have obtained ISO 9001 2008
2) The quality is stable and excellent
3) A variety of products, satisfies all the needs of old building and new building.
4) Effective construction, can be implemented both mechanically and manually, increases effectiveness from 250% to 800%, short working times with high efficiency.
5) A life time of cost efficiency, usage and maintenance costs are low.
6) Saves resources, can save up to 7% in the usage of basic building, saving can be up to 1.5% while reducing the investments for pegs, foundation walls, floors, cement, and reinforcing steel, and respectively reducing the usage of cement, concrete and reinforcing steel bars.
7) Simple to construct, the advanced integration enables the individual constructor to build without professional training, and build like one pleases.
Facade
SA Group has as early as 2004 begun to research and produce outer wall insulation system, and with the Facade external wall series it has already an experience of 8 years,The Facade external insulation system uses polystyrene foam boards or XPS boards as insulation material, with the boards pasted on the wall with Facade adhesive, and then fastened to the wall with fasteners. Afterwards two coats of adhesive are applied onto the boards with a glass fiber mesh embedded into the adhesive. Finally the surface is covered with a paint or decorative plaster, and so an external insulation system is achieved. This system offers a satisfactory insulation result and stands time and weather while at same time possesses a decorative impression. It is a versatile system for heat insulation in buildings. SA Groups Facade ETICS has the advantages listed below:
1) Upstanding adhesive capability. Ensures that the insulation boards are firmly applied on the walls.
2) Low water absorption. With the combination of the materials, the walls are water resistant and let rain water flow quickly off the surface of the wall, while keeping the insulation layer dry and obtain a favorable insulation effect.
3) Fiber reinforced crack preventive characteristic. The Facade adhesive for the external insulation system is equipped with polymer which also prevent cracking,
4) The flexibility of the materials. The adhesive used with the external heat insulation has to correspond with the flexibility of the insulation boards. The adhesives and plasters for the Facade external insulation system are added with polymers which correspond with the insulation boards, thus providing the Facade system to be wear and crack proof.
The EIFS products produced in Shunan are:
1) Dry-mix mortar
- Brick-laying mortar
- Tile adhesives and joints grouts
- Wall renders and plasters ( interior and exterior)
- Floor screeds, self-levelling underlayments and skim coats
- External Insulation and Finishing Systems (EIFS) products
- Powder paints
- Patching and repair mortars
2) Thermal Insulation Panels And Fireproof Board
- Polyurethane/polyisocyanate composite board, pre-insulated air duct panel alu foil covered, freezer panel
- Polyestyrene foam insulation sheets(Extruded Polystyrene Insulation and Expanded Polystyrene Insulation), EPS/XPS sandwich panels, thermo-acoustic insulation layer from extruded polystyrene
- Rockwool insulation board
- Cellular glass boards
3) Accessories and supplementary of EIFS
- Fiberglass mesh & fiber glass mesh self - adhesive
- EIFS plastic dowels
- Corner bead
4)Concrete Admixtures
- Concrete/mortar accelerator
- SNF
- Expansion agent (sy-a,sy-k,sy-g)
- High performance water reducing agent
5)Base coat( bottom coating)/Top Coating
- Heavy Textured Acrylic Primer
- Heavy Textured Acrylic Finish Coat
6)Waterproofing materials
- Polyurethane waterproofing coating
- Waterproof Membrane
The product of the company has the following characteristics
1) Environmentally friendly and healthy, we have obtained ISO 9001 2008
2) The quality is stable and excellent
3) A variety of products, satisfies all the needs of old building and new building.
4) Effective construction, can be implemented both mechanically and manually, increases effectiveness from 250% to 800%, short working times with high efficiency.
5) A life time of cost efficiency, usage and maintenance costs are low.
6) Saves resources, can save up to 7% in the usage of basic building, saving can be up to 1.5% while reducing the investments for pegs, foundation walls, floors, cement, and reinforcing steel, and respectively reducing the usage of cement, concrete and reinforcing steel bars.
7) Simple to construct, the advanced integration enables the individual constructor to build without professional training, and build like one pleases.
Facade
SA Group has as early as 2004 begun to research and produce outer wall insulation system, and with the Facade external wall series it has already an experience of 8 years,The Facade external insulation system uses polystyrene foam boards or XPS boards as insulation material, with the boards pasted on the wall with Facade adhesive, and then fastened to the wall with fasteners. Afterwards two coats of adhesive are applied onto the boards with a glass fiber mesh embedded into the adhesive. Finally the surface is covered with a paint or decorative plaster, and so an external insulation system is achieved. This system offers a satisfactory insulation result and stands time and weather while at same time possesses a decorative impression. It is a versatile system for heat insulation in buildings. SA Groups Facade ETICS has the advantages listed below:
1) Upstanding adhesive capability. Ensures that the insulation boards are firmly applied on the walls.
2) Low water absorption. With the combination of the materials, the walls are water resistant and let rain water flow quickly off the surface of the wall, while keeping the insulation layer dry and obtain a favorable insulation effect.
3) Fiber reinforced crack preventive characteristic. The Facade adhesive for the external insulation system is equipped with polymer which also prevent cracking,
4) The flexibility of the materials. The adhesive used with the external heat insulation has to correspond with the flexibility of the insulation boards. The adhesives and plasters for the Facade external insulation system are added with polymers which correspond with the insulation boards, thus providing the Facade system to be wear and crack proof.
Basic Information
- Company Name:
Shanghai Shun'an Building Materials Co.,Ltd.
- Product/Service:
insulation material , tile adhesive mortar , construction grout
- Capital (Million US $):
5 Million RMB
- Year Established:
2004
- Company Address:
No.68, Wanda Road, Lingang Wanxiang Industrial Park
Other products from this company More
Email to this supplier
Categories: Portland cement based tile grout(joint filler)
Our Products Range
All Products Renders and Plasters (interior and exterior)Dry Mortars For External Insulation Systems|--EIFS Adhesive|--EIFS Base Coat|--Wall Renders and Plasters|--Mortar Produced By Vitrify Micro Beads Material|--OtherTile Adhesives & Joint Grouts|--SA tile adhesive range|--Portland cement based tile grout(joint filler)|--OtherSpecial Dry-mixed MortarWaterproofing cementitious|--Rapid Plug|--Admixtures for Mortars and Concrete|--Rapid Set Cement|--Waterproofing Mortar|--OtherInsulation Boards|--HVAC Systems & Parts|--Rockwool insulation|--Fiber composite plate|--OtherEIFS Accessories and Supplementary Items|--Fasteners|--Fiberglass Mesh|--OtherEIFS Finish CoatUngrouped